AccuCampus: How to Turn Beacon On/Off?

Note: This article explains how to turn the Beacon device on and off. To learn how to set up the Beacon for AccuCampus See How do I assign a beacon profile to a sign-in station in AccuCampus?

Follow the step by step guide on how to configure a beacon for it to be available for detection on the AccuCampus app.

Turning on the Beacon

1. To turn on a beacon you must first open the case. (For more information on how to open the beacon check the manual instructions included with the device.)

2. Once the case is open, press on the white button next to the battery for 5 seconds until a blue light appears. If the light remains turned on for a few seconds it means you powered the beacon on.

3. When this is done put the case back on the beacon and you're all set!

Note: For more information on how to use the beacon on a sign-in station, see How do I set up beacons for a sign-in station in the AccuCampus App?

Turning off the Beacon

1. To turn off a beacon you must first open the case. (For more information on how to open the beacon check the manual instructions included with the device.)

2. Once the case is open the beacon should be turned on with the blue light. To turn the device off click on the white button for approximately 3 seconds until you see the blue LED light flashing. This means that the beacon is powering off.

3. When this is done put the case back on the beacon and you're all set!